Lab 1
General
Lab 1 concerns controlling the water level in a double water filled by a pump. You will experiment both with manually controlling the pump for the tanks, and by manually tuning a P, PI and PID controller for the pump. The purpose is for you to get hands on experience with the difference between manual and automatic control, open and closed loops, and the significance of the P, I and D components of a PID controller.
This lab is scheduled to weeks 2 and 3 of the course. Responsible is Frida Heskebeck.
Important: If you have any symptoms of Covid-19 (see symptom list in Swedish or English) at the time of your booked laboratory session, you must not attend it. In this case, contact the lab responsible by e-mail as soon as possible, and we will find a new time for you to perform the laboratory exercise.
Instructions
Instructions for the lab can be found here:
Registration
Registration opens 1 week before the first lab session, i.e. in course week 1. You register here:
Preparation
Before the lab it is important that you read through the instructions. For this lab however there are no mandatory preparation exercises, but it is recommended to read the first chapter in the lecture notes. Do note that both of the following labs will have mandatory preparations for you to complete.